Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working, it could be because of an inoperative battery for the coin-cell, water damage, receiver module issues, or a defective chip. These are all simple fixes and you can restore your car to speed in no time!
The key blade may become worn out and cause a malfunctioning car key. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to replace the blade.
peugeot key of your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob's function to cease, preventing you from locking or opening the doors or starting your engine. You'll require a new battery for your key fob to fix this.
You'll need to purchase batteries for replacement from an auto parts store or at your local hardware store. When you purchase the battery ensure that it's fresh and hasn't just been sitting on the shelf for a long time. A brand new battery has more capacity and will transmit a stronger signal your car.
After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors don't unlock it is most likely with the car's receiver module, which can be reprogrammed by your local Peugeot dealer.
The chip inside the key fob might be damaged. This could happen if you drop your key fob on the ground or expose it to water. Rubber seals that protect your chip from moisture could wear out over time. This is especially true when you expose your key fob to water for long periods of time, for example, submerging it at the beach in the ocean. To prevent this from occurring, it's crucial to keep your key fob free from moisture and not let it come in contact with water.
Water Damage
Don't give up on your key fob if it gets wet, whether you slipped into a pool or fumbled into a water puddle. The key fob is protected by rubber seals but prolonged exposure to water can damage its electronic chip. Since water is a good conductor and conductor, any water that is able to get inside the key fob could result in a series of short circuits that eventually ruin the chip. After removing the battery, scrub the contacts with isopropyl alcohol and dry it off completely before putting it back in.
A dead battery may be the reason that your Peugeot 308 won't start. If you have an extra vehicle, jumper cables can be used to get the engine going again. If the battery is defective the battery must be replaced.
A malfunctioning receiver in the car can also prevent it from receiving the signal from the keyfob. The key fob could be damaged or there might be an issue with the antenna, wiring or even the key fob itself. It could be necessary to program a new keyfob for your vehicle if using one. If you are unable solve the issue yourself, contact a professional technician. A professional who has been trained in the field will be able to detect the issue quickly and then fix it right away.
Radio Interference
Interference can trigger symptoms such as a key fob that's not being recognized or has a narrow range. It is either radiated or conducted, with the former resultant from power supply cables and speaker wiring that is too close to electrical components. In general, rerouting cables or moving them away from these components will fix the problem.
It's unlikely that someone is listening to your key fob's signals in attempt to steal your car It's possible, however, that radio interference has ruined the signal. Fortunately, this issue is simple to fix.
If your key fob isn't being recognized by the system, try a new battery. Also, make sure that the battery is the right type and size. If the battery is not properly sized, it could damage the fob.
These devices may interfere with the key signal, if they utilize the same radio frequency. It is best to avoid using these devices with your key fob.
Pairing Issues
The remote keyless entry system of automobiles has a receiver which receives radio signals from the key fob. It will not be possible to start your car if this receiver isn't working even if your key fob works and is reprogrammable. The issue can be caused by a range of factors, including the dead battery in the coin and water damage. The receiver could also be failing due to a software issue or internal damage to the key.
One of the most common reasons why your Peugeot 308 key fob doesn't work is because the battery inside has died. The battery can be easily replaced, however you must ensure that it's the proper battery for your key fob. A bad battery can cause more problems with the key fob, so it's best to use the original or an alternative that is similar in size, voltage and specification.
Your Peugeot 308 keyfob may not function if it was paired with a different vehicle. This can happen if have given your key fob to someone else or in the event that the key was used to unlock or start other vehicles. This can be fixed by reprogramming the key fob with an OBDII scan. The scanner will usually ask you for specific information about your vehicle, for example the VIN or engine type, so it's essential to fill in the correct information.